Second Hand

Second Hand


Cavan Agricultural Agencies carries a wide variety of parts as well as new and used equipment. Please call us on (08) 8262 3847 if there is something you are looking for and we would be happy to help!






Massey Fergusson 250 with Front End Bucket

The MF 250 was equiped with a 2.5 ltr, three-cylinder Perkins AD3.152 diesel engine. Producing 40hp ad 2250 RPM of PTO output power. Comes with a front end bucket as standard

Case International 484 with backforks

Low kms, heavy duty machine with back forks.

David Brown 885

The model 885 was in production when Case (Tenneco) purchased David Brown. The tractor continued in production under the David Brown name for most markets, while carrying the Case name in North America. The 885 has a 2.7L 3-cyl Diesel Engine providing 47HP, perfect for small farm usage and lite agricultural work.

Ford 2120

The Ford 2120 is a 4WD compact utility tractor from the Twenty Compact series. This tractor was manufactured by Shibaura for Ford in Japan from 1987 to 1991. The Ford 2120 is equipped with a 2.3 L four-cylinder diesel engine and one of two transmissions: gear type transmission with 12 forward and 4 reverse gears or power shuttle transmission with 12 forward and 12 reverse gears. The Ford 2120 compact utility tractor used the Shibaura T854 engine. It is a 2.3l four-cylinder natural aspirated diesel engine with 85.0 mm (3.35 in) of the cylinder bore and 100.0 mm (3.94 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 43.2 PS (31.8 kW; 42.6 HP) at 2,500 rpm of net horsepower. The Ford 2120 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS or FOPS canopy (optional) and 42.0 litre fuel tank.

Fendt 205P

Fendt Farmer 205P 4 x 4 Tractor, 4 Cylinder diesel, 3 speed manual transmission, fully enclosed cabin, cushioned seat, 3pt linkage, PTO, tow bar, 2 banks of hydraulic remotes, 11.5/80-15.3 front tyres, 14.9-28 rear tyres assorted wear, rear guards, showing 7929 hours, with front mount forklift attachment with 1000mm tynes. The clutch has recently been replaced by work on acquisition. Dimensions approx 3600 x 1900 x 2250mm (H).